Model: GT-I9300I
Unlock bootloader
Not required
Information
To successfully obtain root rights, you must:
Follow the instructions exactly;
Charge the device battery to 50% or more;
Make sure the model and firmware version match;
Be prepared for a possible complete reset of data on your device!
If all the points are completed, you can proceed to obtaining root rights.
Our site does not give a 100% guarantee that the method given in this article will definitely work. But we study a large number of sources, look at the results of those who have tried it, and then, based on the information received, we draw conclusions and post the methods.
The administration of the Root-Device.ru website is not responsible for any possible negative consequences for your device!!
In this article we will find out, how to root samsung galaxy s3 duos.
- Download and install Towelroot.
- Launch and click «make in ra1n«
- After rebooting the phone (it will reboot itself) install SuperSU.apk
Root rights have been obtained.
- Download this archive.
- Unpack the archive onto your computer.
- We transfer the phone to firmware mode and connect it to the computer.
(Turn off the phoneand then click Volume Down + Home + Power) - Let’s launch Odin3 v3.07 (It should be in the unpacked archive).
- Select in the line «PDA» file CF-Auto-Root-s3ve3g-s3ve3gzh-gti9300i.tar.md5 and press «Start«.
- Now the phone reboot into modified recovery with logo red Android. The installation will begin in it. SuperSU and stock recovery.
Root access is open.
- Download Odin v3.09.
- Download custom recovery.
- Download and copy to external SDCard SuperSU (CWM).
- Download and copy to external SDCard This archive.
- We put the phone into firmware mode: turn off and hold the buttons while turned off Volume down (Volume down) + «Home» (Home) + Nutrition (Power).
- Connect the phone to the PC using a USB cable.
- Let’s launch Odin And we clean up check marks Auto Reboot And F. Reset Time. In line PDA (AP) insert the file with the downloaded recovery.
- Press the button Start in the program Odin and wait for the firmware to complete.
- Turn off the phone by holding the button for a long time Power.
- Loading into recoveryby holding down the buttons Volume up (Volume up) + «Home» (Home) + Nutrition (Power).
- Install root (recovery):
1) Install zip
2) Choose zip
3) UPDATE-SuperSU.zip
4) We confirm the installation and wait until the superuser is installed. - Install knox remover:
1) Install zip
2) Choose zip
3) Knox-Remower.zip
4) Confirm the installation and wait for Knox to be removed.
Root rights successfully obtained.
- Install KingRoot.
- Internet must be enabled. (Wi-Fi/3G etc.)
- Get Root. (wait for 100%)
- Restart your device.
Root rights successfully obtained.
This completes the process, enjoy using it 🙂
