Model: SM-G570F
Unlock bootloader
Not required
Information
To successfully obtain root rights, you must:
Follow the instructions exactly;
Charge the device battery to 50% or more;
Make sure the model and firmware version match;
Be prepared for a possible complete reset of data on your device!
If all the points are completed, you can proceed to obtaining root rights.
Our site does not give a 100% guarantee that the method given in this article will definitely work. But we study a large number of sources, look at the results of those who have tried it, and then, based on the information received, we draw conclusions and post the methods.
The administration of the Root-Device.ru website is not responsible for any possible negative consequences for your device!!
In this article we will find out, how to root samsung galaxy j5 prime.
Preparation.
The easy way, Android 6.0
- Download to PC – CF-Auto-Root-smg570f.tar;
- On your smartphone, go to settings, open the item «About the device» -> «Software Information» and in the window that appears, click 7 times per point Build number. The following message should appear at the bottom of the screen: «Developer mode is enabled«. After this, in the main settings menu, the item – » should appear.Developer Options«;
- We put a tick opposite «USB debugging» And «OEM Unlock«;
- Now you need to go to bootloader mode. To do this, simultaneously press and hold three buttons: «Volume down«, «Turning on» And «Home«. A turquoise window with a warning will appear – click the button «Volume +«;
- Let’s launch Odin on behalf of the administrator and place root file in the field AP;
- We connect the device to the PC, make sure that Odin «saw» it: in the upper left corner a blue rectangle should appear with device port identifier;
- Click on the button START and wait for the firmware to finish.
Root obtained.
The method is more complicated, Android 7.0
Preparation.
- Download to PC – TWRP.3.2.1.G570F.tar;
- Download to your smartphone – SuperSU (CWM/TWRP);
- Download to your smartphone – no-verity-opt-encrypt-5.1.zip
- Go to the device settings, enable the item «Developer Options«, put a tick next to «OEM Unlock«
Important! In the future, under no circumstances. Do not disable this item.otherwise, after rebooting the device you will get an eternal reboot with a red inscription: «Custom binary blocked by FRP«, consequences – Reflashing the device;
Process.
- We are flashing «TWRP» through OdinBy this instructions;
- Necessarily!!! in the tab «options» uncheck the box Auto Reboot;
- Turn it off smartphone and enter the «recovery» mode (Volume up + Home + Nutrition).
Getting root.
- We go into the installed recovery;
- Will open Team Win Recovery Project;
- We move the swipe to confirm the changes in the system section, then change the language: «settings» => «fifth point, planet icon» => «slider down» And «Russian» => – «swipe«;
- Next, for the recovery to work properly, we will need to format the data partition. (Warning! All your data and apps on your smartphone (not SD card) will be destroyed);
- Click on the tile Cleaningfollowed by Format Datawe confirm – YES;
- After – MANDATORY!!! reboot again into recovery (Reboot->recovery) and sew the previously downloaded script no-verity-opt-encrypt-5.1.zip (installation -> no-verity-opt-encrypt-5.1.zip -> swipe to flash);
- Next we find the previously downloaded one SuperSU.zip and we flash it in the same way as the previous archive;
- Reboot the device.
Root obtained.
Root for version Android 8.0
Preparation.
- Download and install – drivers;
- Download and unpack – one;
- Download and copy to the folder with Odin – twrp-3.2.3-1-on5xelte.img.tar;
- Download and copy to MicroSD – Magisk-v17.3.zip;
- Download and copy to MicroSD – RMM-State_Bypass_Mesa_v2.zip;
- Download and copy to MicroSD – new_boot.img;
- Download and copy to MicroSD – no-verity-opt-encrypt-6.0.zip;
- Enable developer mode:
1) You need to go to settings -> about the device -> software informationand click 7 times on the line «Build number«;
2) Return to Basic settings -> developer options and activate two options – «usb debugging» And «OEM Unlock«;
A warning about unlocking the bootloader and resetting will appear, confirm and wait.
If there is no factory unlock, wait 7 days.
Process.
- Let’s launch the program Odinclick on the button «AP«, select the previously downloaded file twrp-3.2.3-1-on5xelte.img.tar;
- Necessarily!!! in the tab «options» uncheck the box Auto Reboot;
- Fully turn off smartphone;
- Press and hold the buttons Volume down, Home, Nutritiona turquoise screen with «Warning» will appear, then press the button Volume upwe get into the mode download;
- Connect the phone to the PC and the program Odin should detect your smartphone – In the field ID:COM the port number should be displayed, and in the field «Message» line «-> ID:0 / 0xx -> Added!!«;
- Press the button «Start» and wait for the firmware to finish: at the top Odin should be highlighted PASSand in the field Message line «-> OSM -> All threads completed. (succeed 1 / failed 0)«;
- Next, we reboot the smartphone straightaway in TWRP, disconnect the smartphone from the PC, hold down Volume down And Nutritionas soon as the smartphone screen goes out, immediately release it Volume down and hold down the button Volume up + Home + Nutritionhold the buttons until the TWRP logo appears;
- TWRP will launch, click on the right language selection tile, select Russian and swipe to allow changes in the system;
- TWRP will load and now we format the data partition, click on Cleaningclick on the right tile Format datawe write YES and we wait;
- We are returning to main menu by pressing a button Backin the main menu, click on the button Rebootfurther Recovery;
- Boot back into TWRP and click on the tile Installationclick on the left tile Selecting a drive and select the RMM-State_Bypass_Mesa_v2.zip archive, swipe to install;
- After flashing the archive, reboot into TWRP again;
- TWRP will load again and press the button Installation and select the archive no-verity-opt-encrypt-6.0.zipflash the archive and after flashing the archive, reboot into TWRP again;
- TWRP will load again and press the button Installationpress the button Install img at the bottom right, find and select new_boot.imgthen select the section bootafter flashing new_boot and go back, click on the tile Install zipfind and select the archive Magisk-v17.3.zip(you can download the latest one magic from our website), flash the archive and reboot into the system;
Root obtained.
For those who got an eternal reboot with a red inscription: «Custom binary blocked by FRP«.
All firmwares presented below are five-file and contain the required 3 familiar files – AP, B.L. And CPand also 2 files to choose from – CSC or HOME_CSC:
- CSC – formatting all user data from the smartphone to the state «out of the box«;
- HOME_CSC – all user data, including internal storage, will remain intact.
Android Marshmallow 6.0.1
Android Nougat 7.1
Android Nougat 8.0
Instructions for reflashing with the official firmware – one.
